Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - PhantomRage

Pages: [1]
1
Other Hardware / open loop galvos
« on: March 11, 2011, 12:59:18 pm »
I am looking for a set of open loop galvos like the ones in the link.

http://www.midwest-laser.com/html/open-loop_x-y_scanners.html

I used to see them on ebay.  But don't want to pay midwest 195 bucks.  crap for that you can get cheap o 20pps closed loop.

anyone know of a good source? 

2
Lasers / ALC 60X for sale?
« on: March 10, 2011, 12:42:11 pm »
Hello all.

I have a ALC60X that I no longer use.  I know with the DPSS stuff out there the price of Argon may have dropped. 

I will post photos of the system as soon as i can.  but for now here is what I have.

A Rebuild (Evergreen laser did the work)  ALC60X, New tube. (about 10 hours on it) with 60cm optics.  The tag from Evergreen reads 160mw at 6.5 amps.  Also they placed a new starter board in the laser as well.

I have the laser mounted in the OEM Xerox case with OEM fan.  It has the handles etc, and a plate in the front for mounting Galvos or ???

I have the power cord, and a blow up old POS power supply.  That has been rebuild time and time again. 

The laser is in the Xerox shipping box, (big old padded box) and can ship power supply if wanted.

I don't really want to sell.  but I can't find a power supply to save my life.  At least one that does not cost over 500 bucks :(

So looking to sell or trade.

If there is a interest I will dig it out and take photos.

But here are some laser photos of when the power supply worked... 

3
Laser Enthusiasts Meetings / Re: Hello, new to the board...
« on: February 17, 2011, 01:25:47 pm »

I would imagine that you already understand the idea of using a DC modified, 8 channel sound card with outboard voltage correction and gain to create all the control signals.

James.  :)

No clue on this at all.  Please point me to some good reading on this topic.....

4
Laser Enthusiasts Meetings / Re: Hello, new to the board...
« on: February 17, 2011, 01:19:46 pm »
Thank you for the welcomes.  It may take some time for me to respond due to job/family.

And, oh no.  I have not tried the sound card mod as of yet.  The only mods I knew of back in the late 90's early 2000 was for the Amiga and laser max software.  I will have to do some reading on this.  Sounds like fun.  I have re build the Redline beamscan input to work with dc voltage.  The scanners are open loop and sloooow.  But it is a good test to see if any sound card mods work.  Or i could use the oscilloscope in x-y.  The 100Mhz scope works good for testing amps.

My 60x needs a new power supply.  The one i have is old and seen its fair share of abuse and has given up its last life.  (foam party's kill supply's)  Yes, i was young....

My goal is to build a laser system that can do 20pps or higher.  I need to advance into this hobby for myself.  My ideals have been stuck in my head for 8 years now.  Got to get the light shows out.


5
Laser Enthusiasts Meetings / Hello, new to the board...
« on: February 13, 2011, 09:56:32 am »
Hello all.

I am new to this board, and very glad that it is here.  I have been into lasers for quite some time now.  Never really advancing into the hobby as far as I would like to have gone.  I started into the laser hobby around 1998.  I have not done much since 2004.  My job, and family takes most of my time. 

The gear I have is.
ALC-60X brand new rebuild from evergreen lasers.  (dead power supply.  it is old, and blows the output transistors.  So looking for new one, even a gold box would be killer)
25mw hene
redline beanscan controller/galvo head.
shinp DL-55C

I know that a lot has changed from the time I as into this hobby.  I have build galvos, and amps from scratch.  (cnc mill and lots of time winding)  But I am done with that sort of stuff now seeing that the price has dropped a lot.

I look forward to reading the post on the forum. 

-Jason

Pages: [1]
SMF spam blocked by CleanTalk
SimplePortal 2.3.7 © 2008-2024, SimplePortal