Hardware > Construction

help on a 1500$ rgb laser proector

(1/2) > >>

johannesgj:
well i have gained fundings for 1000$ to build a laser projector.
all following is about building a projector in denmark which means shipping is a big issue!.

first of you might call it impossible but heres the catch
it doesnt have to work straight away with more than green.
only green laser have to be ok the rest lasers can be bad.
i have checket out that galvos for 30k are about 400$ incl shipping.
i want 30k galvos course of future rgb plans.

well  my questions is once and for all:


* is this all i need:
3 dr lava laser modulators.
green,blue,red lasers.
soundcard with mod and external connection board
galvos
optics.
* can anybody supply a direct link to a 7.1 sound card shipped to europe. i simply cant figure out which are compatible.
* help on a kit to make the sound card to a laser compatible one
* where to get cheap dichros and optics. im going for a setup with green laser pointing directly and other two lasers from the side.
* if anybody have second hand or new equipment for sale that can cover the above lease make contact! - johannesgj at the wicked gmail.comkind regards johannes (really kicking it now with fundings!!!)

James:
I have just a few fully assembled LaserBoy correction amps. I would be very pleased to send one to you to add to your creation!

If you like, I could even get the sound card and put the whole thing together for you; ready to go for $200.

Like this: http://laserboy.org/forum/index.php?topic=378.msg5058#msg5058

James.  :)

johannesgj:
hi james. i have received the fundings on my account today hurray!! for both me and you since ive decided to accept your kind offer on the soundcard plus correction amp.


well now to some shipping and so.
200$ for the soundcard incl correction amp.
what about shipping to denmark?


how can i pay you?
and james dont take if personal when im so long to answer. i really dig your forum but i have so little sparetime to make projectors in:-( hehe


one little question 
with dr lavas laser modulators and some lasers what do i then need to make the lasers work, power?


im gonna buy the 30k galvos incl driverboards and powersupply.
then i guess i need
a shutter?
a power supply for the lasers and shutter?
modulator for shutter?
anything ive missed?


answers to above questions are greatly appreciated!
kindest regards
johannes

johannesgj:
would this site:
http://stores.ebay.com/Zet-Biz
be an ok place to buy laser diodes based on your experience?
im thinking of something like:
405nm 250mw laser violet
650nm 180mw laser red
532nm 70mw laser green

would they fit eachother in intensity or would it be totally wrong?
well i still need a good international place for dichros and mounts. any ideas?

johannesgj:
what about this dichro set:
http://lasershowparts.com/store/index.php?_a=viewProd&productId=153
with:
Kit contains:

2 x 25mm fine adjustable mirror mounts(3 axis)
2 x slotted 'L' brackets
1 x reflect blue, pass red & green dichroic filter
1 x reflect blue & green, pass red dichroic filter

would that do the job and exactly how would the setup be then.
like this:?

red ->------/------/-----------\
                b        g             \--------------
                l         r
                u        e
                e        e
                          n

Navigation

[0] Message Index

[#] Next page