LaserBoy

Hardware => DACs => Topic started by: Litwood on January 30, 2022, 06:34:07 am

Title: What hardware is required for a 2w rgb club laser I've got 2 of these
Post by: Litwood on January 30, 2022, 06:34:07 am

Hi James


I came across laserboy from reddit.
As much as I have gathered


1. Buy a usb snd8 card?
2. You may have a 40$ kit for purchase.
3. Would I need a ilda cable to go from the (1-snd8 card) to my ilda port on the laser?

Title: Re: What hardware is required for a 2w rgb club laser I've got 2 of these
Post by: James on January 30, 2022, 11:55:56 am

1.    https://www.aliexpress.com/item/1005001348632810.html?spm=a2g0o.productlist.0.0.2f0e728bv0Qp6A&algo_pvid=bcd353af-78cd-4cf8-96d3-975ba5c6be8f&algo_exp_id=bcd353af-78cd-4cf8-96d3-975ba5c6be8f-32&pdp_ext_f=%7B%22sku_id%22%3A%2212000015773343793%22%7D&pdp_pi=-1%3B19.42%3B-1%3B309%40salePrice%3BUSD%3Bsearch-mainSearch

This link is only good for so long.

2.  Yes I have kits.
http://laserboy.org/forum/index.php?topic=561.0

3. Yes. You might be able to find an lpt printer extension cable. It's a DB-25 M to a DB-25 F. All pins have continuity straight through.