Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - no-esc

Pages: [1] 2
Construction / A couple of Test videos
« on: January 23, 2011, 02:06:04 pm »
Details later on.. heres vids

****************removed because im testing the forum*********** -BlinkenLights

LaserBoy !!! / 2011 version of LASERBOY
« on: August 07, 2010, 02:31:39 pm »
I was sitting here thinking with all the collective brains on here would it be possible to do the following:

Turn laserboy into a show controller.
Mouse interface.
An Audio sensitive function that you could load or select .ild/.wave files into and have it use those as its database for sound sensitive display?
A midi mapable interface?

Lets make 2011LB a rock the laser software world interface?

Am I totally offbase?

Construction / Spare Aluminum
« on: May 22, 2010, 12:34:07 am »
After I finished thermal cycling magnetrometer last night.  I took a walk down to the machine shop and peaked into the Scrap Bin.   I came away with the following neat things.

And Now For Something Completely Different! / I have a new spawn....
« on: March 30, 2010, 11:18:46 pm »
Ava Lucille Kennedy

Born 28th March at 706pm

6lbs 6oz

Mom and baby are both healthy

see you all in a few days




Read more on Flaminpyro's build

I hear a rumor he has a 4 motor spiro going..

Lasers / Beams and Lumina like effects...
« on: February 19, 2010, 08:48:49 pm »
First pics and video are me out back at work... with my recently built 100mw green and some pieces of ice

Media of the moment / Stumbled upon DEADMAU5....
« on: February 18, 2010, 12:59:22 am »
Where have I been the past 4 years...

Fuck... I used to be on top of electronic music...

Fuckin life eh?

BTW here is a nice live set from this guy...

Lasers / Spacelas PT-ITRUST board and Flexmod Analog Driver Issues
« on: February 13, 2010, 08:25:26 am »

    I set the max Gain out at DR. Lava's board for my red (20ma), violet(60ma) and green(100ma) using a +5v supply to the modulation input as directed in the Lava Instructions.

    Connected everything up to my PT-ITRUST dmx board.

    Powered everything on.

    Green and Violet were fine. Red one was extremely bright. Then turned into another LED (LOL).

    decided to measure diode out at DR. Lava's board running the same test pattern using the dmx board as the modulation input signal.

    Red was reading over 500ma??????????

    I then the violet - 160ma?????
    Green - 300ma

    Luckily those last two were not out of spec for the diodes...

    Has anyone else experienced this using the PT-ITRUST board and Flexmod drivers?

« on: February 02, 2010, 06:20:48 pm »
So I got home from work around 2pm today...

10pm to 2pm... is a long freakin day...

The woman went shopping. I went to bed...

She came in and woke me up at 5pm... (2hrs nap) and asked for help unloading the car...

THIS WAS IN THE BACKSEAT!!!!!!!!!!!!!!!!!

Construction / RF components.... for Ferry
« on: January 31, 2010, 05:43:13 pm »

Construction / Dr Lava Flexmod Drives???
« on: January 31, 2010, 03:55:24 pm »
I have decided to go with Dr lavas flexmod drivers for my RGV build.

Is it possible to use one wall wart say 5v 2.5 amps to drive all three?

or a 9V at atleast 1.5 amps?

A 50mw Green

Common designation: LPC ; LOC (Long Open Can)
Manufacturer rated output power: 150mW
Manufacturer rated operating voltage: 2,35v
Manufacturer rated operating current: 205mA
Safe operating current: ~350mA
Enthusiast operating current: ~420mA
Maximum operating current: ~500mA
Average output power: ~250mW
Recommended driver: rkcstr MicroDrive ; DrLava FlexDrive

Common designation: SF-AW210
Manufacturer rated output power: 120mW
Manufacturer rated operating voltage: 4,8v
Manufacturer rated operating current: 115mA
Safe operating current: ~180mA
Enthusiast operating current: ~200mA
Maximum operating current: ~250mA
Average output power: ~130mW
Recommended driver: rkcstr MicroDrive ; DrLava FlexDrive

Not a bad find ...

Lasers / My self built Hand Held Astronomy Vision Assistance Devices
« on: December 29, 2009, 04:16:53 am »
[smg id=109]
[smg id=111]
[smg id=112]
[smg id=110]

Green - 50mW module from O'like.
Red - LPC being run at 350mA.  mW=??
Violet - SF being run at 175mA mW=??

I have no way of measuring power.

Special thanks to the following

-Heatsinks for the Coleman Flashlight I chose as host:  flaminpyro of LPF

-LPC diode and SF-AW210 6x blu-ray violet diode from: MODWERX

-For deciding to sell his 2 Coleman hosts.  Just when I was online looking for more of the colemans JEFFD of LPF

Lasers / Ghetto 70mW Green HAHAHA
« on: December 21, 2009, 04:37:18 pm »
for james

Other Hardware / RB DIY Green house light?
« on: December 21, 2009, 03:58:25 pm »
Anyone have a good schematic or plan for building a nice LED Red/Blue tomato growing light fixture?

Mom wants to start growing her new strain of cherry japenese cherry tomatoes.. and she has been pricing greenhouse lighting and its really expensive..


Pages: [1] 2
SMF spam blocked by CleanTalk
SimplePortal 2.3.7 © 2008-2023, SimplePortal