Messages

61

LaserBoy !!! / Re: I'm trying to setup an ild file for my build in sdcard interface

« on: July 05, 2015, 11:27:58 am »

I've made a RGB TTL test ild using the ishow programm. Opening in LB shows the shifted color. LB alerts 26 bytes of unrecognised data ..., it can be opend by [ESC], but see colors. I do not know how to handle this 


screenshot ...

62

LaserBoy !!! / Re: I'm trying to setup an ild file for my build in sdcard interface

« on: July 05, 2015, 08:15:54 am »

Yes I read the post about drawing and setting up. Interesting, but I haven't be tested all.


I tested LB on RPI 2, works fine. 


But first I want to setup LB + DAC on PC (tunning, testing, ...), then I'll carry on with embedded device (RPI). I read there are swaped audio channels.

My Laser unit has got ilda interface 25 pin in/out plugs (analog RGB).

63

LaserBoy !!! / [link] LaserBoy for raspberry pi 2

« on: July 05, 2015, 07:40:59 am »

build host & tested on raspberry pi 2, ubuntu 14.04.02 LTS armhf


have fun 


https://mega.co.nz/#!p5dWhBZD!IJl7jivKCVa3W8o3R2Tn8fBofQlbx_gFoHjFCSg-bi8

64

LaserBoy !!! / Re: I'm trying to setup an ild file for my build in sdcard interface

« on: July 04, 2015, 08:12:52 am »

I've played around with all the settings you tould me.


Now I'm only able to produce ild files that can be imported to the ishow programm, but I still can not play them direct from sdcard. I have to convert them in the ishow picture by picture. All the colors are changed Green->Yellow, Red->White, Blue->Cyan, ... using default palette. I've also testet the TTL color palette and others but they produces unusable ild files.


Best way would be a correction amp kit letter from you :-D

65

DACs / Re: I want to build a DAC for Raspberry Pi 2

« on: July 03, 2015, 08:09:06 am »

german keyboard work typing correct keys. As I've compiled LB on ubuntu host? 


but setup ild for sdcard or iShow-prog-import-test still do not work. 


I'll will try again...

66

DACs / Re: I want to build a DAC for Raspberry Pi 2

« on: July 01, 2015, 07:33:47 pm »

fine, what is the best way to pay? 

Im from Germany (Bavaria)

I'm looking for a lot n this forum because I'm very new to RGB Lasers, real galvanos and ild.

In the late 80's I've played a lot with my NeHe + C64 + interface + positioning mirrows and other effects. In thouse days it was impossible for me to buy such things...

2015: The RGB is a nice toy. I've testet from sd card and from qlcplus (DMX), but this is all limitted to ttl at this time. For me as hobbyist it is not intresting to buy pangolin ...

I'm using Linux since the late 90's so LaserBoy is my favorit choice.

Also the wave file idea is very cool, because  qlcplus can start extern exec from macros. But first of all I've to learn more about the LB sw (setting for ~25k, ...)

a pic off my qlc laser test console:

67

About This Forum / not allowed to search for posts in this forum

« on: July 01, 2015, 05:04:59 pm »

An Error Has Occurred!

You are not allowed to search for posts in this forum.

returns on input

68

DACs / Re: I want to build a DAC for Raspberry Pi 2

« on: July 01, 2015, 04:59:28 pm »

@James thanks ,
I've found C-Media 6206 USB sound chip is inside.

And what about the amp kit? Do you still sell them?

How can I get one?

69

LaserBoy !!! / I'm trying to setup an ild file for my build in sdcard interface

« on: July 01, 2015, 10:34:30 am »

sdcard, TTL Interface
http://de.aliexpress.com/item/EMMA-500MW-RGB-Red-Green-Blue-Laser-Light-Stage-Effect-DJ-Party-Professional-Club-Disco/32297673993.html


test 1:
import a dxf file, import TTL colormap.
-> file just produce a red flash and let the laser units fw reboot.
-> Error when importing in iShow  "Out of List boundary"


test 2:
import a dxf file, set default 255 colormap.
-> file just produce a red flash and let the laser units fw reboot.
-> Error when importing in iShow  "Out of List boundary"


test 3:
extract and save only one frame from LB logo.
-> works
-> importing in iShow works


The files I can use are:
ild files shiped with the Laser on its sdcard, or made with a software called iShow (also from sdcard).
If I extract only one frame from the LaserBoy logo to ild, it also works, but only one frame otherwise it reboots.


When I try to import the multiframe ild in the ishow sw, it alerts "Out of List boundary" the files shiped are also multiframe, but they work.


Any Idea how to setup a correct ild file for this?


thank's Emanuel

70

DACs / Re: I want to build a DAC for Raspberry Pi 2

« on: July 01, 2015, 04:24:49 am »

@BlinkenLights


that is good. Here from Germany I could only find this one provided by lots of brands:
http://www.digitus.de/sv/produkter/multimedia/audio/usb-audio-adapter/71-usb-sound-box-da-70800/


http://www.logilink.de/Produkte_LogiLink/Eingabegeraete_Multimedia/Audio_Zubehoer/USB_Sound_Box_71_8-Kanal.htm

71

DACs / I want to build a DAC for Raspberry Pi 2

« on: June 30, 2015, 05:11:55 am »

hi James,


I've got a 500mW RGB + 25k sdcard laser unit (Emma Lights EM RGB 222) and a raspberry PI 2.


I want to build an DAC interface for those in order to use laserboy. Do you still ship the kit?


If yes, how can I get one?


And what 7.1 soudcard to buy ? Have you got a link?


thank's Emanuel