Author Topic: Community Laser Projector Build!  (Read 81115 times)

0 Members and 1 Guest are viewing this topic.

Offline James

  • Administrator
  • Hero Member
  • *****
  • Posts: 2130
  • Milliwatts: 47
  • Gender: Male
    • View Profile
    • LaserBoy !!!
Re: Community Laser Projector Build!
« Reply #60 on: July 12, 2010, 02:16:34 pm »
Now I just want my dual 150mW green on the table and working!

Oh well.....

I ordered one module and we are going to TEC it and analog mod it and see how well it works. I guess I should have just ordered both of them at the same time. But if it doesn't work, I'm not much of a pointer nut, so a greenie outside of my projector isn't worth $63 of my money.

Oh yea.... And I need another mount and a good dichro for mixing the 405nm.

DrLava pointed one out on the web for $195!!!

That's a lot for a 1 inch circle of glass!  :P

I wonder if they accept paintings?  %)

Look what I just found! ;D

http://cgi.ebay.com/Dichroic-Mirror-420DCLP-30-X-42mm-use-45-deg-/160426634414?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item255a2c2cae#ht_500wt_897

James.  :)
« Last Edit: July 12, 2010, 04:12:52 pm by James »
LaserBoy is Sofa King Cool!
But it will never be Alpha King Done!

Offline drlava

  • Sr. Member
  • ****
  • Posts: 314
  • Milliwatts: 18
    • View Profile
Re: Community Laser Projector Build!
« Reply #61 on: July 12, 2010, 04:11:38 pm »
I want to make a special post to thank Andrew for all of his hard work and expertise in making this projector!

He was at my house yesterday for more than 13 hours! And that was just to put stuff on the optics table that he had already spent WEEKS putting together before he came over.

This is a super extra special projector for me, because it was largely in trade for my work on writing the code that is the core of LaserBoy. Andrew has based his laser software on the original concepts of the LB data structure / memory object and its internal, self-referential overloaded math operations! He also had eyes for one of my newer paintings, "The Mind Eraser". So we made a deal!

I love the idea that this stuff came from one of the best sources in the world. I know him. He's my friend. He values my work. This did not cost me money!

How cool is that? !!! ;D

James.  :)

I had a good time working on it James, thank YOU for the pizza and beer to keep us going, and a special thanks for sharing your code and offering the Mind Eraser!  Your decision to open source laserboy a few years ago was what started all this rolling. 

 As for the painting, I am the proud new owner of an original Lehman, also the first painting 'sold' by James!  It is complete, balanced, structured but with with pizzaz, and a wonderful mix of colors and textures, full of interest.

 Thanks again James, I look forward to seeing your future work in this area.

Alex, now that the pictures are up, what do you think?

Andrew
« Last Edit: July 12, 2010, 04:13:13 pm by drlava »

Offline meandean

  • Sr. Member
  • ****
  • Posts: 466
  • Milliwatts: 13
  • It's about sight AND sound.
    • View Profile
Re: Community Laser Projector Build!
« Reply #62 on: July 12, 2010, 08:06:20 pm »
 Outstanding work, Andrew! :)  Can't wait to play with the completed project!
 
                                                                  Dean
"Patience is for the dead."

Offline Alfa Romeo

  • Jr. Member
  • **
  • Posts: 60
  • Milliwatts: 11
  • Gender: Male
    • View Profile
Re: Community Laser Projector Build!
« Reply #63 on: July 15, 2010, 03:05:34 pm »
Wow james, thats the shit! OMFG cool beams/setup. Andrew's da man!!

later and congrats on the new baby!!

pat


Of all the things I've lost, it's my mind I miss the most.
Ozzy Osbourne

Offline rMuD

  • Newbie
  • *
  • Posts: 18
  • Milliwatts: 1
    • View Profile
Re: Community Laser Projector Build!
« Reply #64 on: July 30, 2010, 07:15:18 pm »
right after the first lighting of blue.  Red coming soon.. and green is ready...


500mw Blue (445nm) Green 400mw (532mw) Red 400mw (dual 658)  1.3W  crazy beams coming soon, Pangolin Card Shipped Fed EX 3day..  should be ready to fire up James board tonight






Offline rMuD

  • Newbie
  • *
  • Posts: 18
  • Milliwatts: 1
    • View Profile
Re: Community Laser Projector Build!
« Reply #65 on: July 30, 2010, 07:19:22 pm »
OK, so the Heat Sinks screw to the bottom of the board, and the P3 Drivers are Heat sinked and double insulated and heat sink greased to the Heat Sinks..  going out to a .1 " connector  carrying +12V GND Modulation+ and Interlock.


cross connect board takes ILDA 25 pin, and takes +RGB and gnd from there and feeds thru the jumper block, jumper block also has +5 Test mode, which it is in right now.  +12 GND and +5 coming in screw terminals. 


I tested the interlock and got a red light when I opened the jumper.  Put the Jumper back and it did not recover, took a power recycle to release the lost interlock.

Offline James

  • Administrator
  • Hero Member
  • *****
  • Posts: 2130
  • Milliwatts: 47
  • Gender: Male
    • View Profile
    • LaserBoy !!!
Re: Community Laser Projector Build!
« Reply #66 on: July 31, 2010, 01:07:56 am »
Be ready with The LaserBoy DAC, a meter and the LaserBoy application and call me!

I'd love to help you make pretty pictures! ;D

James.  :)
LaserBoy is Sofa King Cool!
But it will never be Alpha King Done!

Offline staroflaw

  • Newbie
  • *
  • Posts: 11
  • Milliwatts: 0
    • View Profile
Re: Community Laser Projector Build!
« Reply #67 on: August 02, 2010, 08:10:03 am »
You done any vids of ya setup James?

Offline James

  • Administrator
  • Hero Member
  • *****
  • Posts: 2130
  • Milliwatts: 47
  • Gender: Male
    • View Profile
    • LaserBoy !!!
Re: Community Laser Projector Build!
« Reply #68 on: August 02, 2010, 02:05:00 pm »
Not yet.

I'm still working on putting it together.

I have no green at the moment.

I gave my pieces to drlava (Aluminum chunks, TECs and green modules).

He's going to set it up with his analog modulated driver.

I might get one of the new P3 drivers to replace the N2 driver on my dual reds and use the extra N2 on the greens.

The little boards you see in rMuD's setup with the three trim pots is the new P3.

Neato!

Now I have to drill some holes in an Aluminum plate for pots, switches and DB25 ports.

I'm going to put 250K pots on the color mod lines going to each laser, so I can white-balance from there without messing with the diode drivers. I'm also putting spdt switches on each color to switch between DAC color signals and regulated +5VDC; so I will be able to turn on any color and adjust the level from nothing to full on with no input control signals at all.

James.  :)
« Last Edit: August 02, 2010, 02:08:47 pm by James »
LaserBoy is Sofa King Cool!
But it will never be Alpha King Done!

Offline no-esc

  • Full Member
  • ***
  • Posts: 146
  • Milliwatts: 5
  • Gender: Male
    • View Profile
Re: Community Laser Projector Build!
« Reply #69 on: August 07, 2010, 02:43:09 pm »
Do you have a drawing example of how yo6u plan on putting the POTS inline for balancing the laser outputs?

And to all waiting for the Scanner Group buy I apologize I have been super busy with work, baby and daughters visit the past few months.

"Acid isnt making a comeback....its never left......." me
"this cutting edge DJ from The mother ship will get you telling other people about him with his thrilling style of deep Funky techno disco house on the acid tip!!" taken from the MOTHER SHIP Daily
-------------------------------------------

Offline James

  • Administrator
  • Hero Member
  • *****
  • Posts: 2130
  • Milliwatts: 47
  • Gender: Male
    • View Profile
    • LaserBoy !!!
Re: Community Laser Projector Build!
« Reply #70 on: August 07, 2010, 04:15:53 pm »
Check this out!

I put it all in a big ugly black box!

It has great air flow!

You can blow out a candle if you put it in front of the laser port!

James.  :)
« Last Edit: August 07, 2010, 04:44:15 pm by James »
LaserBoy is Sofa King Cool!
But it will never be Alpha King Done!

Offline James

  • Administrator
  • Hero Member
  • *****
  • Posts: 2130
  • Milliwatts: 47
  • Gender: Male
    • View Profile
    • LaserBoy !!!
Re: Community Laser Projector Build!
« Reply #71 on: August 07, 2010, 04:16:53 pm »
more.....


James.  :)
LaserBoy is Sofa King Cool!
But it will never be Alpha King Done!

Offline drlava

  • Sr. Member
  • ****
  • Posts: 314
  • Milliwatts: 18
    • View Profile
Re: Community Laser Projector Build!
« Reply #72 on: August 09, 2010, 01:21:19 am »
and now for some green.. ! 

Thanks for resizing the photos

Offline James

  • Administrator
  • Hero Member
  • *****
  • Posts: 2130
  • Milliwatts: 47
  • Gender: Male
    • View Profile
    • LaserBoy !!!
Re: Community Laser Projector Build!
« Reply #73 on: August 10, 2010, 12:17:08 am »
Here comes the GREEN! ;D

I still have to mount my knife edge mirror.

James.  :)
LaserBoy is Sofa King Cool!
But it will never be Alpha King Done!

Offline James

  • Administrator
  • Hero Member
  • *****
  • Posts: 2130
  • Milliwatts: 47
  • Gender: Male
    • View Profile
    • LaserBoy !!!
Re: Community Laser Projector Build!
« Reply #74 on: August 11, 2010, 11:25:12 pm »
Check it out! I added the knife edge combining optic.

James.  :)
« Last Edit: August 12, 2010, 01:19:23 am by James »
LaserBoy is Sofa King Cool!
But it will never be Alpha King Done!

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.7 © 2008-2024, SimplePortal