Messages

1

DACs / Re: C-Media USB Driver CM106 CM6206

« on: August 30, 2010, 12:16:53 pm »

Well I was finally able to create a file using the Audacity 1.3 program that all channels were played seperatley.
 
Hopefully this solves the problem. Will experiment a little futher but think my problem is solved.
 
Thanks for the Help
 
Mark

2

DACs / Re: C-Media USB Driver CM106 CM6206

« on: August 30, 2010, 09:57:22 am »

Hi Mark!
 
 Some test waves...
 
 
http://laserboy.org/forum/index.php?topic=177.msg2157#msg2157
 
 
                                      Dean

 
What software was used to create the 8 Channel WAV file.

3

DACs / Re: C-Media USB Driver CM106 CM6206

« on: August 30, 2010, 08:38:55 am »

Will try these and let you know how they work.

4

DACs / Re: C-Media USB Driver CM106 CM6206

« on: August 28, 2010, 09:10:19 am »

It is using the latest Windows Media Player to play file.
 
 
Is there a good application to make 7.1 WAV files that I could try.
 
Mark

5

DACs / Re: C-Media USB Driver CM106 CM6206

« on: August 27, 2010, 08:41:39 am »

It is a 32 Bit. I have used the test function to verify speakers and they work when tested this way. I have also used tha test wav file that is on the microsoft site under creating 7.1 Audio and that also works. It is only when I use a the AVI file that was created using the wrapper on the same microsoft page.
 
I have also tried a freeware type wrapper that creates a wav file but that also did not work.
 
Thansk
 

6

DACs / Re: C-Media USB Driver CM106 CM6206

« on: August 26, 2010, 10:38:24 am »

Tried all the above on the original machine and it is still doing the same thing mixing channels.
 
I don't have access to the new Win7 machine until tommorrow. Will try it then.
 
Thanks Again for all the help
 
Mark

7

DACs / Re: C-Media USB Driver CM106 CM6206

« on: August 26, 2010, 08:42:14 am »

Will try these and let you know.
 
I also have a new Win7 machine I can try which driver would be best for that.
 
Thanks

8

DACs / Re: C-Media USB Driver CM106 CM6206

« on: August 25, 2010, 03:47:58 pm »

Thanks,
 
Tried that but channels still mixing.

9

DACs / Re: C-Media USB Driver CM106 CM6206

« on: August 24, 2010, 03:44:07 pm »

We are trying to integrate the StarTech 7.1 Audio Sound Card using the cm6206 Chipset into one of our devices.
 
We use the AVI wrapper provided by microsoft to create our AVI sound file. When using on a XP machine the file plays correctly all signals going to the right channels.
 
When we try doing this on a WIN 7 Machine the channels are mixed and are not sent to the right locations.
 
I am using the only drivers that I can find so far that were created in Oct 2009.
 
Anybody have any suggestions on what I might try to correct this problem
 
Thanks
Mark